Denon DRA-100 Service Manual

2. UserInitializationMode
The setting values are initialized. See Initialization Items (Default setting).
After initialization, the Unit returns to normal mode.
CAUTION
The following 3 points are different from the Factory Reset.
• Does not clear the version information such as rewriting failed log.
• Does not clear the history of protection.
• Network devices are started and initialized.
2.1.Operations
Press and hold the power operation button "
X
" before inserting the AC plug, then insert the AC plug while holding down
the button and wait for more than 3 seconds.
Select "
Initialize
" using "
CURSOR
d
" and "
CURSOR
f
", then press the "
Enter
" button to select.
Press "
Enter
" button.
Press "
Enter
" button.
Startupdisplay
"
Initialized
" is displayed for 5 seconds.
Wait for more than 90 seconds after "
Initialized
" is displayed and then turn the power off.
(During this time, start and initialize the network devices.)
19

Denon DRA-100 Specifications

General

Internet radio	Yes
Supported radio bands	-
Impedance	8 Ω
RMS rated power	70 W
Product color	Silver
Headphone connectivity	6.3 mm
AUX in	No
Audio (L/R) out	1
AC outlets quantity	1 AC outlet(s)
Power consumption (typical)	60 W

Weight and Dimensions

Depth	332 mm
Width	280 mm
Height	160 mm
Weight	4800 g
Dimensions (WxDxH)	280 x 332 x 160 mm