Denon DRA-100 - Version Display Mode

3. VersionDisplayMode
The unit functions normally. The item "Version" is added to the menu.
3.1.Startingup
Press and hold the power operation button "
X
" before inserting the AC plug, then insert the AC plug while holding down
the button and wait for more than 3 seconds.
Select "
Version Check
" using "
CURSOR
d
" and "
CURSOR
f
", then press the "
Enter
" button to select.
Startupdisplay
"Version" is displayed for 5 seconds.
3.2.DisplayOrder
q
System μ -com Version →
w
System μ-com (Boot Loader) Versio
→
e
Network u-com (Boot Loader) Version →
r
Network u-com (image) Version
→
t
FPGA Version →
y
Bluetooth Mac Address →
u
Touch Sensor Version
Select "
Version
" in the "
Setup
".
Press "
Enter
" button.
q
System μ -com Version ：
Press "
CURSOR
f
" button.
w
System μ -com (Boot Loader) Version ：
Press "
CURSOR
f
" button.
e
Network u-com (Boot Loader) Version ：
Press "
CURSOR
f
" button.
20