Dexter Laundry B Series User Manual

49
8514-311-001 REV PR
7.4 Programming
7.4.1 Default Program Settings
DRY
CYCLE
COOL
DOWN TIME
(minutes)
TOTAL
CYCLE TIME
(minutes)
DRYING
TEMPERATURE
DRYER LOAD
(ºF) (ºC)
1 5 35 180 82 Towels, pads, heavy cotton
2 4 20 170 77 Sheets, blended materials
3 5 25 180 82 Cotton
4 2 20 130 54 Synthetic Materials
5 4 25 175 79 Blended Materials
Table 7-5 Default Program Settings
7.4.2 Temporary Dryer Controller Programming
Temporary programming mode will allow the change of the stored dry cycle settings in the dryer
controller for one complete dry cycle. After the dry cycle is complete, the default settings that
existed before the temporary change are restored. The temporary dry cycle can be stopped and
cleared at any time during the dry cycle operation.
To temporarily change a dryer controller cycle, follow the procedures below. Things that are
displayed on the 4-digit numeric display will be in “quotation marks”. Touch pad switches on the
dryer controller that physically need to be pressed will be in CAPITAL AND BOLD LETTERS.
If, at any time, you want to escape the temporary programming mode while changing the
program settings, you can press the STOP touch pad switch on the dryer controller if the 4-digit
numeric display is not flashing. The SELECT/ENTER touch pad switch on the dryer controller can
be pressed and released to enter the flashing value shown on the 4-digit numeric display and
allow you to escape.
If you press and release the STOP touch pad switch on the dryer controller, when the 4-
digit numeric display is not flashing, the temporary changes to the dry cycle program will be
cancelled. The stored dry cycle settings that existed before the temporary change will then be
restored.
If, at any time, you want to start the temporary dry cycle during the temporary
programming mode, press and release the START touch pad switch on the dryer controller if the
4-digit numeric display is not flashing. The SELECT/ENTER touch pad switch on the dryer
controller can be pressed and released to enter the flashing value shown on the 4-digit numeric
display and allow you to start the temporary dry cycle. If you start the temporary dry cycle, the 4-
digit numerical display will change the total dry time and count down to 0 as the dry cycle
progresses.

Dexter Laundry B Series Specifications

General

Brand	Dexter Laundry
Model	B Series
Category	Dryer
Language	English