Dexter Laundry B Series User Manual

53
8514-311-001 REV PR
7.4.5 Permanent Dryer Controller Programming Procedure
1. Make sure the dryer is not in a dry cycle. The 4-digit numeric display on the dryer
controller will show “LOAd” when the dryer is not in a dry cycle.
2. Press and release the PROG touch pad switch on the dryer controller.
3. Press and release the UP touch pad switch on the dryer controller. The programming
L.E.D. will illuminate and the 4-digit numeric display on the dryer controller will change
to “Prog”.
4. Press and release either the UP or DOWN touch pad switch to choose the dry cycle you
want to change (dry cycle 1 through 5). The dry cycle L.E.D. will illuminate to indicate
which dry cycle you are choosing. If you press and hold down either the UP or DOWN
touch pad switch, the controller will sequence through the five dry cycles.
5. Press and release the SELECT/ENTER touch pad switch once you have chosen the dry
cycle you want to change. After you press the SELECT/ENTER touch pad switch, the
dry time L.E.D. will illuminate, the dry cycle L.E.D. and the programming L.E.D. will
remain illuminated, and the total dry time will also be displayed on the 4-digit numeric
display.
6. Press and release either the UP or DOWN touch pad switch on the dryer controller to
change the total dry time. Once either UP or DOWN touch pad switch is pressed, the
dry time L.E.D. and the total dry time on the 4-digit numeric display will flash. If you press
and hold down either the UP or DOWN touch pad switch, you will increment (UP arrow)
or decrement (DOWN arrow) through the total dry times available (1 through 60
minutes). The dry time on the controller display includes the cool down time along with
the heated time. To not change the total dry time, do not press either the UP or DOWN
touch pad switch. Go to the next step.
7. Press and release the SELECT/ENTER touch pad switch of the dryer controller. Once
the SELECT/ENTER touch pad switch is pressed and released, the dry time L.E.D. will
switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, the temperature
L.E.D. will illuminate, and the drying temperature will be shown on the 4-digit numeric
display.
8. Press and release either the UP or DOWN touch pad switch of the dryer controller to
change the drying temperature. Each press and release of either the UP or DOWN touch
pad switch will either increase or decrease, respectively, the temperature by five
degrees Fahrenheit or three degrees Celsius, depending on how your dryer controller is
set up. Once either the UP or DOWN touch pad switch is pressed, the temperature
L.E.D. and the drying temperature on the 4-digit numeric display will flash. If you press
and hold down either the UP or DOWN touch pad switch, you will increment (UP
arrow) or decrement (DOWN arrow) your way through the available drying
temperatures (105° Fahrenheit or 41° Celsius, up to 195° Fahrenheit or 90° Celsius). If
you do not want to change the drying temperature, do not press either the UP or
DOWN touch pad switch. Go to the next step.

Dexter Laundry B Series Specifications

General

Brand	Dexter Laundry
Model	B Series
Category	Dryer
Language	English