Digi Connect and ConnectPort TS Family web interface Configuration through the web interface
Digi Connect Family and ConnectPort TS Family
56
n TCP Sockets: Auto-Connect (TCP client) to another host on the network or allow incoming
connections on this serial port (TCP server). The TCP Sockets profile allows serial devices to
communicate over a TCP network. The TCP server allows other network devices to initiate a
TCP connection to the serial device attached to the serial port of the Digi Connect and
ConnectPort TS Family product. The TCP client will establish a TCP connection to a defined IP
address and port number.
For more information about the TCP Sockets, see the following:
l Automatic TCP connections (Automatic Connection)
l TCP and UDP network port numbering conventions
See Assign a profile to a serial port for more information about assigning a profile.
n UDP Sockets: Allows the automatic distribution of serial data from one host to many devices at
the same time. The UDP Sockets profile allows serial devices to communicate using UDP. The
UDP Server configuration allows the serial port to receive data from one or more systems or
devices on the network. See Assign a profile to a serial port for more information.
The UDP Client configuration allows the automatic distribution of serial data from one host to
many devices at the same time using UDP sockets.
The port numbering conventions shown in the TCP Sockets Profile also apply to UDP sockets.
Not all port profiles are supported in all products. Supported port profiles varies by Digi Connect and
ConnectPort TS Family model. If a profile listed in this description is not available on the page, it is not
supported in the Digi Connect and ConnectPort TS Family product.
If you selected a port profile, the port number associated with the port profile appears at the top of
the page. You can change or retain the profile and adjust individual settings.
Everything displayed on the Serial Ports Configuration page between Port Profile Settings and the
links to the Basic Serial Settings and Advanced Serial Settings depends on the selected port profile.
Assign a profile to a serial port
To assign a profile to a serial port:
To Next Page
Loading...
Need help?
General