Page xvi About this User’s Guide 90030500B
Chapter 11 Configuring RealPort Connections
describes how to configure or mod-
ify connections to terminals, printers, and other devices if you have the RealPort pro-
tocol running on your host server.
Chapter 12 Configuring SNMP
describes what to do if your system supports SNMP
(Standard Network Management Protocol) and you want PortServer II to respond to
SNMP requests.
Chapter 13 Configuring Printer Connections
describes how to configure or modify
PortServer II for connection to a printer.
Chapter 14 Configuring Frame Relay
describes how to use PortServer II with a
Frame Relay service.
Chapter 15 Configuring RADIUS
describes to configure PortServer II to use the
RADIUS protocol for dial-up connections. You must have RADIUS available on your
server.
Chapter 16 Remote Configuration
describes how to configure PortServer II from a
remote host. You can update both the PortServer II software and your own configura-
tion file in this way.
Chapter 17 Troubleshooting
. Refer to this chapter for help if PortServer II is unable
to connect to your network, or if it displays an error message.
Chapter 18 Digi Support Services
describes various ways that you can contacting
Digi International if you have a problem with PortServer II.
The
Glossary
contains a list of technical terms, and their explanations.
Which chapters should I read?
If you are not familiar with PortServer II, you should begin by reading Chapters 1 and
2 which provide a general description of PortServer II and its operation.
If you want to install Portserver II, read Chapter 3.
To configure PortServer II for the first time, read Chapter 4, which provides a “quick
start” sequence for configuring the main functions.If you wish to change the initial
configuration, or add more devices or users, refer to the relevant information in Chap-
ters 5 through 15.
If you have several PortServer II units to install, or have many similar users, refer to
Chapter 17.
To Next Page
Loading...
Need help?
General