Digi PortServer II User Manual

Page 228 Troubleshooting 90030500B
NETD Messages
(
Option=netd
)
1) IP address is unknown - RARPing
PortServer II will try to learn its IP address via RARP.
INETD Messages
(
Option=inetd
)
1) unexpected signal - <number>
*Internal error*
Serial Messages
(
Option=serial
)
1) (<port>) spurious interrupt
*Internal error* (possible hardware problem).
2) receive error - mask 0x<number>
*Internal error*
User Messages
(
Option=user
)
1) auto-connect-port: illegal user id on port <port>
The Autoconnect port UID field indicates a non-existent user.
2) time string error <string>
A user's access time string has a syntax error
3) Verify routine found no user name
*Internal error*
4) <name>: Autoconnect enabled with no host address.
The user was configured for autoconnection, but no host is defined.

Digi PortServer II Specifications

General

Brand	Digi
Model	PortServer II
Category	Server
Language	English