Page 166 Configuring Printer Connections 90030500B
Queue name examples
An example entry into the BSD style
/etc/printcap
file, with the PortServer II
named
nx5
and using
ascii_1_f
as the print queue name is shown below:
lpi|portserver line printer port 1:\
:lp=:rm=nx5:rp=ascii_1_f:sd=/usr/spool/lpd/nx5:lf=/usr/adm/lpd-
errs:
Note:
The number of copies option with lpr (lpr-#<
number of copies>
) is not sup-
ported.
Note:
Banner pages are not supported.
ascii_8_f
This queue prints on a printer connected to Port 8, translates
Carriage Returns to Carriage Return/Line Feed pairs, and prints
a Form Feed at the end of the job.
raw_10_d
This queue prints on a printer connected to Port 10, with no Car-
riage Return/Line Feed translation, and appends <Ctrl-D> to the
end of the print stream.
ascii_1
Prints on a printer connected to Port 1, translates Carriage
returns to Carriage Return/Line Feed pairs, and adds no extra
characters to the end of the print stream.
To Next Page
Loading...
Need help?
General