Digi PortServer II User Manual

Page 226 Troubleshooting 90030500B
16) packet discarded to interface <name>: fragmentation data error
The packet to be fragmented was in error, so the packet was discarded.
Forwarder Messages
(
Option=fwdr
)
1) packet discarded on interface <name>: <reason>
The reason(s) for discarding the packet are detailed in associated Trace IP messages.
Routed Messages
(
Option=routed
)
1) adding dependency route for <index> (<IP address>) failed: out of memory
The static route identified by
<index>
could not be added to the Route Table due to a
memory allocation failure.
2) adding dependency route for <index> (<IP address>) failed: invalid gateway
The static route identified by
<index>
could not be added to the Route Table because
the gateway is unknown or invalid.
3) adding dependency route for <index> (<IP address>) failed: invalid metric
The static route identified by
<index>
could not be added to the Route Table because
the metric was not 1 for a direct host address, greater than 3 for a direct net address, or
0 for an indirect address.
4) adding dependency route for <index> (<IP address>) failed: invalid address
The static route identified by
<index>
could not be added to the Route Table because
the address is the same as the Ethernet's IP address.
5) adding dependency route for <index> (<IP address>) failed: invalid mask
The static route identified by
<index>
could not be added to the Route Table because
the mask equals 0.
6) adding dependency route for <index> (<IP address>) failed: invalid interface name
The static route identified by
<index>
could not be added to the Route Table because
the interface (WAN) name is unknown or invalid.

Digi PortServer II Specifications

General

Brand	Digi
Model	PortServer II
Category	Server
Language	English