90030500B Troubleshooting Page 191
EBI 3...............none
Press "?" for diagnostics menu
or carriage return to continue booting
3.
When you press
?
, the diagnostics menu appears, as shown below. This lists the
eight tests that you can select. These tests perform diagnostic checks on hardware
within PortServer II.
DIAGNOSTICS MENU---
A = All tests (except 9)
1 = Front panel light test
2 = RAM test
3 = Timer and real-time clock test
4 = EBI internal loopback test
5 = EBI external loopback test
6 = Ethernet internal loopback test
7 = Ethernet external loopback test
8 = Flash RAM test
9 = Watchdog test
C = Configure boot
T = Set date & time
Ethernet address: 12:34:56:78:9A:BC
B = Reboot
4. To start any test, press the appropriate test number. See
Basic Test Descriptions
later in this chapter for information on the individual tests.
To Next Page
Loading...
Need help?
General