100
Connecting to Broadband Internet
Phone System Setup
You must set up the receiver for your telephone system (touch-tone or rotary-phone
dialing), and set a telephone number prefix, if you need a prefix to dial an outside call.
Note: A prefix is different than an area code, which is required for all 10-digit dialing.
1 Press MENU button, select the Settings tile, then Network Setup, and then Phone Line.
2 Select the Touch Phone or the Rotary Phone option under Phone Type.
3 Select either the No Prefix or the Prefix Code option under Outside Line.
Note: Usually, you need a telephone number prefix only for business phone installations.
For most residential installations, all you need to do is set the telephone system type. The
default setting of No Prefix will allow correct dialing. If this is the case, select the Save
option to save the above settings, and stop here. If you know that you need to set a prefix,
then instead of selecting the Save option, skip to step 5.
4 If you selected No Prefix, then select Save.
5 If you selected Prefix Code, the receiver highlights the box where you must enter the
exact sequence used when dialing via an outside line. Use the on-screen number pad.
6 If you haven’t already, now select the option to Save.
CONNECTING TO BROADBAND INTERNET
If you have broadband (high-speed) Internet access at home, connect your receiver to
your home network. You can use this connection to order Pay-Per-View programming
using your remote control if you are not able to connect a telephone line. It also provides
access to additional content not usually available through your DISH package.
Refer to www.mydish.com/connectivity
to view more detailed instructions on making this
type of connection.
To Next Page
Loading...
Need help?
General
