58
Using PrimeTime Anytime™
USING PRIMETIME ANYTIME™
The PrimeTime Anytime™ feature is exclusive to your Hopper HD DVR and once enabled,
will provide on-demand access to your favorite shows on ABC, CBS, FOX and NBC in
high definition. (Note if any of your local HD channels are not available in your market,
these shows cannot be recorded.) Programs airing during prime-time hours, 8-11 p.m. ET
Monday through Saturday, and 7-11 p.m. ET on Sunday, will be recorded and accessible
for eight days from their initial air dates. And you can always save the shows to your DVR
library to be able to watch them at any time, or delete one or more shows at any time.
Enabling the PrimeTime Anytime™ feature
To enable the PrimeTime Anytime™ feature on your Hopper HD DVR, do the following:
1 Press the MENU button on your DISH remote control, highlight the PrimeTime Anytime
tile and press SELECT.
2 Select the Enable option to turn on the feature, then highlight and select Save.
3 If you Enabled the feature, it will begin recording HD prime-time shows each night. Note
that Enabling the feature does not instantly populate the folder with content; recordings
will begin during the next applicable nightly interval and gradually populate the folder con-
tents, day-by-day.
Disabling the PrimeTime Anytime™ feature
To disable the PrimeTime Anytime™ feature after it has been enabled, do the following:
1 Press the MENU button on your DISH remote control, highlight the Settings tile on the
Main Menu screen and press SELECT.
2 Highlight and select DVR Defaults and then select PrimeTime Anytime.
3 Select the Disable option to turn off the feature, then highlight and select Save.
If you Disabled the feature, it will stop recording shows automatically. (You can still set up
event timers to record any individual shows you want, of course.) In order to stop tonight’s
To Next Page
Loading...
Need help?
General
