53
Reverse, Fast Forward, and Skip
REVERSE, FAST FORWARD, AND SKIP
This section describes how to use your remote control’s DVR buttons to move forward and
back quickly while you watch TV.
SLOW MOTION AND FRAME-BY-FRAME
Your satellite receiver has features that allow you to slow down live TV. This section
describes how to use the DVR buttons to use slow motion and frame-by-frame advance or
reverse while you watch TV. Press PLAY to exit any of the features described below.
Press BACK once to reverse the program 4 times as fast as normal play. Press
BACK twice to reverse at 15 times normal speed, three times to reverse at 60
times normal speed, and four times to reverse at 300 times normal speed. The
on-screen bar shows how far you’ve gone. For a live program, you can only
reverse back to the last channel change or back one hour, whichever occurs first.
Press FWD (forward) once to fast forward through the program at 4 times normal
speed. Press FWD twice to forward at 15 times normal speed, three times to
forward at 60 times normal speed, and four times to forward at 300 times normal
speed. The on-screen bar shows how far you’ve gone. Of course, you can’t go
forward into the part of a live program that hasn’t been broadcast yet.
Press SKIP BACK to skip back about 10 seconds in a program. Press this button
repeatedly to skip back another 10 seconds at a time.
Press SKIP FWD to skip ahead about 30 seconds in the program. Press this
button repeatedly to skip ahead another 30 seconds at a time.
Press PAUSE and then press BACK to reverse the program in slow motion.
Press BACK once to reverse the program 1/4 the speed of normal play. Press
BACK twice to reverse at normal speed.
Press PAUSE and then press FWD to forward the program in slow motion.
When you press FWD once the program advances at 1/15 the speed of normal
play. Press FWD twice to forward at 1/4 as fast as normal play. Press FWD
three times to play the program at normal speed. Of course, you can’t go
forward into the part of a live program that hasn’t been broadcast yet.
Press PAUSE and then press SKIP BACK repeatedly to reverse the recording
frame-by-frame.
Press PAUSE and then press SKIP FWD repeatedly to advance the recording
frame-by-frame.
To Next Page
Loading...
Need help?
General
