Finding Programs to Watch
27
Starting in One Room and Finishing in Another
channels for you to choose from, as it does when the On option is set.
• Off. If you turn off the receiver’s multi-channel recall feature, the RECALL button
goes immediately to the previous channel you viewed. Older channels are not shown.
4 When you are finished changing these settings, highlight and select the Save option. If
you have made changes you do not want saved, press the remote CANCEL button.
STARTING IN ONE ROOM AND FINISHING IN ANOTHER
To start watching a program in one room and resume it in another, do the following:
1 Press the pause button on your current receiver remote control and leave it behind.
2 Go to another room with a connected Hopper HD DVR or Joey Receiver and pick up the
DISH remote control for this location.
3 Press the red button on the remote control to display the TV Viewing Status screen.
4 From the TV Viewing Status screen, select the program you want to resume and continue
watching from where you paused it.
To Next Page
Loading...
Need help?
General
