Eaton ePDU G3 User Manual

Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 101
Read-Write Access
A local or remote administrator who is assigned read-write access can perform the following:
l
Access to up-to-date ePDU data and measurements
l
Create, modify, or disable an administrator or user account except for the SuperUser
l
Create, modify, or disable User-Defined Groups
l
Configure e-mail recipient addresses for e-mail notification to users
l
Restart the communications module
l
Cannot access the Serial interface; must use the Web interface only
l
Access all menus on the Web interface
l
Access to retrieved ePDU up-to-date data and measurements
l
Clear logs
l
Local Administrator Only. Can switch on bootloader mode and upgrade firmware.
Read-Only Access
A local or remote administrator with read-only access has limited privileges, including:
l
Access to up-to-date ePDU data and measurements
l
Has the authority to change the password, but not the login (Remote ePDU-Users cannot change the login
or password)
l
Cannot access the Serial interface; must use the Web interface only
l
Can access the log and notifications submenu, but cannot clear the logs data
l
Cannot configure the TCP/IP, SNMP Global Security, and LDAP settings
No Access
An administrator with no access is not authorized to access to the Web page.
ePDU-User
Read-Write Access
A local or remote ePDU-User with read-write access privileges has access to the same functions as the
administrator, except this user cannot change the account configuration for another user, such as e-mail
addresses for notifications.
Only accessible menu items display for the user according to
the assigned permissions.
NOTE This menu indicates the two ePDU are daisy-chained, one host (ePDU [0] and one
device ePDU (ePDU [1].

Eaton ePDU G3 Specifications

General

Brand	Eaton
Model	ePDU G3
Category	Power distribution unit
Language	English