Eaton ePDU G3 User Manual

Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 112
6. Choose one of the following security levels:
l
No Access: The user is not allowed to access the Web interface.
l
Read-Only: The user can access the Web interface, view the measures, and view the thresholds of the
outlets and groups. This user is not allowed to change any settings or perform actions.
l
Read/Write: The user can access the Web interface, view the measures, and is allowed to change
settings.
7. To configure an e-mail address for this account, click the lin
k of the e-mail address corresponding to this
user. See “Configure the E-mail Notification Settings” for more information.
8. Click Sa
ve.
9. To enable an e-mail address for this account, click the
link on the e-mail address under the e-mail Address
column.
Configure Remote Group Access
NOTE 1 A remote account is an account that will be created on the communications module
in order to be attached to LDAP users so they can use the ePDU. The account
should already exist on the LDAP database.
NOTE 2 T
hese LDAP users will use their LDAP login/password for authentication on the
module.
1. Under Settings, select Access Accoun
ts. The Access Accounts page displays.
2. In the Multi-User Access panel, select A
dd a remote group from the Add drop down list. The Remote
Group Settings dialog displays.
3. Type the remote group login user name to replace the default name.
!
IMPORTANT
This login user name must match the group name that the user has in the LDAP database.
4. Choose one of the following profile characteristics:
l
Admin: This remote group has administrator privileges and controls the access of other users to the
Web interface.
l
ePDU User: The administrator assigns this remote group either read only or read-write privileges to this
user.
l
Outlet User: This user has access to the specified outlet or outlets. Select the outlet or outlets and the
user-defined groups this user can access.
5. Choose one of the following security levels:
l
No Access: The user is not allowed to access the Web interface.
l
Read-Only: The remote group can access the Web interface, view the measures, and view the
thresholds of the outlets and groups. This user is not allowed to change any settings or perform actions.
l
Read/Write: The remote group can access the Web interface, view the measures, and is allowed to
change settings.
6. To configure an e-mail address for this account, click the lin
k of the e-mail address corresponding to this
user. See “Configure the E-mail Notification Settings” for more information.
7. Click Sa
ve.

Eaton ePDU G3 Specifications

General

Brand	Eaton
Model	ePDU G3
Category	Power distribution unit
Language	English