HART functionality
42
a.To change the location where the configuration is saved,
double-tap Location, select an option, and tap ENTER.
b.To specify a name for the configuration, double-tap Name, enter
the name, and tap ENTER.
c.Tap SAVE.
Opening a saved
configuration
A saved configuration lets you edit, copy, send, delete, or rename it.
You can also compare it to other saved configurations.
To open a saved configuration:
1.From the HART Application main menu, double-tap Offline.
2.Double-tap Saved Configuration.
3.Double-tap the storage location where you saved the configuration.
The FILTR button opens a menu that provides both sort and tag filter
options. These options let you customize your view of saved
configurations.
• The Sort option lets you group and display configurations
according to your choice of configuration name, device tag, or
device descriptor.
• The Filter option lets you limit which configurations are displayed
by picking specific characters from the configuration name, device
tag, or device descriptor.
When setting up a filter, you can use two special characters: the
period (.) and the asterisk (*). The period replaces a single
character of any value. The asterisk replaces a string of
characters.
For example, if you want to list all configurations that have a name
of P - 001 to P - 300, enter “P - *” in the filter. If you want to list
configurations with a name that begins P -
0 and ends with a 7, set
the filter to “P - 0.7”. The period will replace only one character
between the 0 and 7.
The XPAND button lets you view the configuration name, device tag,
manufacturer, device type, device revision, descriptor, and the
configuration type. Tap CMPRS to return to the previous window.
4.Double-tap the desired configuration to open the Saved
Configuration menu.
Editing a saved configuration
The Edit option lets you edit a saved configuration while working
offline.
To edit a saved configuration:
1.Open a saved configuration. See “Opening a saved configuration”.
2.Double-tap Edit from the Saved Configuration menu.
3.If a warning appears, thoroughly read the warning, tap CONT to
accept the warning and proceed, or tap EXIT to end this operation.
4.Mark (select) the configurable variables you want sent to the device;
unmarked variables are not included when the configuration is
transferred to a device. Double-tap Mark all | OK to have all
To Next Page
Loading...
Need help?
General
