ER5000 Series —
18
Features and Specications
4.09
[103.8]
.98
[24.9]
.54 [13.77] .54 [13.77]
.43
[11.0]
.93
[23.7]
.75
[19.0]
.20
[5.1]
.75 [19.0] (4x)
.93
[23.7]
.83
[22.0]
Gauge Port
1/8–27 NPTF
Inlet Port
1/8–27 NPTF
1/2-14 NPTF
Conduit
Connection for
USB Wiring
1/2-14 NPTF
Conduit
Connection for
Internal Wiring
Atmospheric Reference
for Internal Sensor
External Ground
Exhaust Port
1/8–27 NPTF
Mounting
Holes
#10-32 UNF
.50 FULL THREAD
[M5 X 0.8
12.7 FULL THREAD]
(4 Places)
1/8" NPTF Plug
Not Used
DO NOT REMOVE
1/8" NPTF Plug
Not Used
DO NOT REMOVE
1/8" NPTF Plug – Not Used
DO NOT REMOVE
All dimensions are called out in
inches [millimeters]
ER5050 Hazardous Location Model
Dimensions – Side Views
Contact the factory for dimensions and specications
of models ER5020, ER5040, ER5100 and ER5110.
Refer to the ER5000 Series Part Numbering System.
CAUTION
Removal of ANY of the 1/8" NPTF
plugs called out on this page, other
than the Gauge Port plug, will
invalidate the Hazardous Location
certification for the ER5050.
To Next Page
Loading...
Need help?
General
