Envoy Installation and Operation
2014 Enphase Energy Inc. 141-00011 Rev 05
ZigBee Device Configuration
Use the ZigBee Device Configuration menu option only if you are also installing an Enphase compatible GE
i210+ Revenue Grade Meter (RGM). For complete installation instructions, refer to the Metering and
Management Solution Installation and Operation Manual at http://www.enphase.com/support.
Set the Time Zone (optional)
Ordinarily, the Envoy obtains the time zone setting from Enlighten. If you do not have an Internet connection
for the Envoy, you may want to set the local time zone. This step is not necessary if the Envoy is
reporting to Enlighten. To set the time zone:
1. From the Administration menu, choose Date, Time, Time Zone.
2. Under Time Zone Setting, select a time zone from the Select Time Zone drop down menu.
3. Click Update timezone setting to complete this task.
Other Administration Tasks
For information on optional Power Meter Configuration, see the Enphase PMRS Technical Brief. This
option does not apply to the Enphase compatible GE i210+ Revenue Grade Meter (RGM).
Other Administration menu options not described in this manual are not required for normal system
operation and should only be performed when recommended by Enphase.
To Next Page
Loading...
Need help?
General