36
Parent topic: Projector Connections
Connecting to a Bluetooth Audio Device
You can connect your projector to Bluetooth audio devices such as speakers or headphones to output
audio from a streaming device or other video source connected to the projector.
Note: The Bluetooth audio device must be A2DP compliant. There may be a slight delay in audio output.
Bluetooth audio devices are not supported in some countries and regions.
1. Turn on the projector.
2. Press and hold the menu button on the projector remote control for about three seconds to
display the Bluetooth menu.
3. Press the arrow buttons on the projector remote control to select the Bluetooth Audio setting and
press Enter.
4. Select On and press Enter.
5. Make sure the Bluetooth audio device you want to connect to is in pairing or discovery mode (see
your Bluetooth audio device manual for details).
6. Select Search Bluetooth Device and press Enter to display a list of available devices.
7. Select the device you want to connect to and press Enter.
8. Press the menu button to exit the menu or the return button to return to the previous screen.
To Next Page
Loading...
Need help?
General
