Epson PowerLite S4 User Manual

63
List of Supported Monitor Displays
List of Supported Monitor Displays
The projection of some signals not listed in the table may still be possible.
However, some functions may not be supported.
*1: Connection is not possible if the equipment does not have a VGA output port.
*2: The value when zoom is set to maximum.
Computer/RGB Video
Signal Refresh rateg (Hz)
Source
Resolution
(dots)
Projected
Resolution*
2
(dots)
VGA 60 640×480 800×600
VGAEGA 640×350 800×438
VESA 60/72/75/85,iMac*
1
640×480 800×600
SVGA 56/60/72/75/85,iMac*
1
800×600 800×600
XGA 60/70/75/85,iMac*
1
1024×768 800×600
SXGA 70/75/85 1152×864 800×600
SXGA 60/75/85 1280×960 800×600
SXGA 60/75/85 1280×1024 750×600
MAC13" 640×480 800×600
MAC16" 832×624 800×600
MAC19" 1024×768 800×600
MAC19" 60 1024×768 800×600
MAC21" 1152×870 794×600
SDTV(625i) 50 720×576 800×600
SDTV(525i) 60 720×480 800×600
SDTV(525p) 60 640×480 800×600
HDTV(750p) 60 1280×720 800×450
HDTV(1125i) 60 1920×1080 800×450
Component Video/RGB Video
Signal Refresh rateg (Hz)
Resolution (dots)*
2
Aspect ratio
4:3
Aspect ratio
16:9
SDTV(525i)
(D1)
60 800×600 800×450
SDTV (625i) 50 800×600 800×450
SDTV (525p)
(D2)
60 800×600 800×450
HDTV(750p) 16:9 (D4) 60 800×600 800×450
HDTV (1125i) 16:9
(D3)
60 800×600 800×450
Composite Video/S-Video
Signal Refresh rateg (Hz)
Resolution (dots)*
2
Aspect ratio
4:3
Aspect ratio
16:9
TV (NTSC) 60 800×600 800×450
TV (PAL, SECAM) 50 800×600 800×450

Epson PowerLite S4 Specifications

General

Number of colors	16.78 million colors
Projection distance	6 m
Vertical scan range	48 - 85 Hz
Horizontal scan range	15 - 92 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Screen size compatibility	30 - 300 \
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Focus	Manual
Focal length range	16.6 mm
Interface	USB
Audio input	RCA x 2
Dimensions (WxDxH)	246 x 328 x 100 mm
Power requirements	100-240 V +/- 10%, 50/60 Hz AC
Connectivity technology	Wired
Noise level	36 dB
Dot clock scanning frequency	162 MHz
RMS rated power	1 W
Number of built-in speakers	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)	5 W
Power consumption (typical)	250 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	2600 g