9
Part Names and Functions
Rear
Remote control light-receiving area
Receives signals from the remote control.
Power inlet
Connects to the power cable.
Computer port
Inputs analog RGB video signals from a
computer and RGB video signals and
component video signals from other video
sources.
Video port
Inputs component
video signals to the
projector from other
video sources.
S-Video port
Inputs S-video signals
to the projector from
other video sources.
USB port
Connects the projector to a computer via the
USB cable when using the wireless mouse
function.
Computer images cannot be projected by using
the USB cable to connect the computer.
Monitor Out port
Outputs the projected computer's analog RGB
signals or RGB video signals to an external
monitor from the source that is connected to
the Computer port. This feature is not available
for video equipment signals.
Speaker
Rear adjustable foot
Lets you level the image.
Audio input
Input audio signals from connected external
equipment.
When you are connecting two or more pieces of
external equipment that use the same input port,
you need to disconnect one before connecting the
other, or use an audio selector.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
