15
Before Use
Signal Lamp
Turns on in the following situations.
You can adjust the volume of the alarm using the adjustment dial on the back of the printer.
Proximity Sensor
If someone enters the operating range of the carriage, this sensor detects the movement and immediately stops the
carriage. Sensors are attached at the positions shown in the photo.
Lamp Color Status Buzzer Sound Meaning
Red On Yes An emergency has occurred.
(Example: The emergency stop button has been pressed or
a service call error has occurred.)
Yellow On Yes An error has occurred.
(Example: The amount of ink remaining has fallen below the
minimum allowed or the carriage has stopped midway.)
Green On No Normal status
(Example: Standing by or printing)
Flashing Yes Normal status
(Example: Carriage/gantry operation has started or print
data is being received.)
To Next Page
Loading...
Need help?
General
