Epson SC-V7000 User Manual

35
Basic Operations
Placing Media on the Table
Read the following before performing any operations.
N"Notes on Handling" on page 23
1
Place the media on the table and align the left edge of the start of the media with the
print start position.
The following illustration shows the relationship between the home position and the print start position.
*Print start position
Specify coordinates for the left/right direction as the X axis, and the front/rear direction as the Y axis. The
example above (50, 100) means 50 to the right and 100 to the back of the origin position.
The media table and the UV Flatbed Controller have different display units for the X and Y axes. The media
table is in centimeters and the UV Flatbed Controller is in millimeters.
When the print start position is set to (50, 100)*
A
Table
B
Media
C
Home position (0, 0)
D
Print start position (50, 100)*

Epson SC-V7000 Specifications

General

Brand	Epson
Model	SC-V7000
Category	Printer
Language	English