17
Before Use
Right (UV Lamp Cooler)
A Coolant injection port
Add coolant at regular intervals. Be sure to use the specified coolant.
N"Preparing in Advance" on page 10
N"Perform Maintenance Once Every Six Months" on page 84
B Control panel (left)
This is not normally used. The temperature of the coolant is set when it is shipped from the factory.
C Control panel (right)
This is not normally used. The luminance intensity of the UV lamp is set when it is shipped from the factory.
If you change the setting, make sure you set it back to the number displayed near the panel.
D Filter
Clean this regularly.
N"Perform Maintenance Once a Month" on page 80
To Next Page
Loading...
Need help?
General
