To Next Page

To Previous Page

T3-B T6-B Maintenance 7. Covers

38 T-B series Maintenance Manual Rev.1

7.1 Arm Top Cover

CAUTION

■

Do not remove the arm top cover

forcibly. Removing the cover forcibly may result

in damage to the cables, disconnection, and/or contact failure.

■

When installing the cover, be careful not to allow the cables to interfere with the

cover mounting and do not bend these cables

forcibly to push them into the cover.

Unnecessary strain on cables may result in damage to the cables, disconnection,

and/or contact failure. When routing the cables, observe the cable locations after

removing the cover. Be sure to place the cables back to

their original locations.

T3-B: 6-M4×8 Sems

T6-B: 4-M4×8 Sems

4-M4×12

Sems

Arm Top Cover

Removal

Unscrew the arm top cover mounting bolts, and then lift the cover.

Be careful of user wires and tubes when removing the cover.

Arm Top Cover

Installation

Put the arm top cover to the arm and secure with the arm top cover mounting bolts.

After securing the arm top cover, make sure that the lower limit mechanical stop is not

touching the cylindrical part of the arm top cover.

For tightening hexagon socket head cap bolts, refer to “2.4 Tightening Hexagon

Socket Head Cap Bolts”.



NOTE



NOTE

Epson T-B Series Maintenance Manual

Other manuals for Epson T-B Series