Epson TM-U295 User Manual

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
43
1.4 Paper
1) Paper types: Normal (high quality), pressure sensitive, and carbon copy papers
2) Total thickness: Single-play paper: 0.09 to 0.25 mm (.0035 to .0098")
Copy paper: 0.09 to 0.35 mm (.0035 to .0138")
3) Sizes: 80 mm (W) ´ 69 mm (L) to 182 mm (W) ´ 257 mm (L)
(3.15" ´ 2.72" to 7.17" ´ 10.12") Up to the European B5 size.
4) Copy capability and paper thickness:
a) No copies (single-ply): 0.09 to 0.25 mm (.0035 to .0098") (135 kg paper or equivalent)
b) Combination of normal paper and pressure sensitive paper:
3 sheets maximum (1 original and 2 copies) (0.09 to 0.35 mm (.0035 to .0138"))
Backing paper: 0.07 to 0.20 mm (.0028 to .0079")
Copy and original paper: 0.04 to 0.07 mm (.0016 to .0028")
Carbon copy paper: Approximately 0.035 mm (.0014")
Example: 1 original and 2 copies
Original:
0.04 mm (.0016") (0.04 mm ´ 1 sheet)
Carbon copy paper:
0.035 mm (.0014") (0.035 mm ´ 2 sheets)
Copy:
0.04 mm (.0016") (0.04 mm ´ 1 sheet)
Backing paper:
0.07 mm (.0028") (0.07 mm ´ 1 sheet)
Total thickness: 0.22 mm (.0087")
5) Copy capability and ambient temperature for printing
Copying capability is influenced by the ambient temperature. Printing must be performed under the
conditions, described in Table 1.4.1.
Table 1.4.1 Relation between Ambient Temperature and Number of Copies
Number of Copies Ambient Temperature
Original+1or2copies
5 ° to 40 ° C (41 ° to 104 ° F)
6) Notes on using slip paper
ù Slip paper should be flat, without curls, wrinkles, or camber, especially at the paper edges.
Otherwise, the paper may become ink stained.
ù When using multiply-ply carbon copy paper, it should be flat and the glue area should be as small as
possible.
ù Glue area should be located at the top or left edge of the slip paper.
ù Since TOF and BOF sensors are optical sensors, paper having holes at the sensor positions or
translucent paper should not be used normally. When using these papers, be sure to disable the
paper sensors by ESCc4 .
ù When using slip paper of 80 mm (3.15") long or less, load the paper so that it is fed straight.

Epson TM-U295 Specifications

General

Color	No
Maximum number of copies	2 copies
Maximum printing width (columns)	42
Dimensions (WxDxH)	180 x 190.5 x 101.5 mm
Power requirements	24 VDC±10%
Connectivity technology	Wired
Printing media thickness	0.09/0.35 µm
Mean time between failures (MTBF)	180000 h
Safety	UL, CSA C22.2 No. 950
Country of origin	Japan
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking
Pallet width	1200 mm
Pallet height	1000 mm
Pallet length (UK)	1370 mm
Quantity per pallet	120 pc(s)
Quantity per pallet (UK)	160 pc(s)
Master (outer) case width	300 mm
Quantity per pallet layer	24 pc(s)
Master (outer) case height	405 mm
Master (outer) case length	485 mm
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	32 pc(s)
Quantity per master (outer) case	4 pc(s)
Package depth	270 mm
Package width	235 mm
Package height	185 mm
Package weight	1845 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	191 mm
Width	180 mm
Height	102 mm
Weight	1600 g