EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
65
1.5 Receive Buffer
Either 512 or 35 bytes is selectable by DIP switches.
1.6 Electrical Specifications
1) Power supply: 24 VDC
±
10%
2) Power consumption
Operating (except for drawer kick-out)
a) Mean: Approximately 600 mA at 24 VDC (full-column printing and data transmission of ANK
characters)
b) Peak: Approximately 5.5 A at 24 VDC (full-column printing and data transmission of ANK
characters)
Standby: Approximately 100 mA (at 24 VDC, 25
°
C (77
°
F))
1.7 Environmental Specifications
1) Temperature
Operating: 5
°
to 40
°
C (41
°
to 104
°
F)
Storage: -10
°
to 50
°
C (14
°
Fto86
°
F) (excluding paper and ribbon)
2) Humidity
Operating: 30 to 85% (no condensation)
Storage: 30 to 90% (no condensation, excluding paper and ribbon)
3) Vibration resistance
When packed: Frequency: 5 to 55 Hz
Acceleration: 2 G
Sweep: 5 minutes (half cycle)
Duration: 1 hour
Directions: x, y, and z
No external or internal damage should be found after the vibration test, and the printer should operate
normally.
4) Impact resistance
When packed: Package: EPSON standard package
Height: 60 cm (2.36")
Directions: 1 corner, 3 edges, 6 surfaces
No external or internal damage should be found after the drop test, and the printer should operate
normally.