Epson TM-U295 User Manual

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
61 60
ESC u
n
[Name] Transmit peripheral device status
[Format] ASCII ESC u
n
Hex 1B 75
n
Decimal 27 117
n
[Range]
n
= 0, 48
[Description] Transmits one status byte for a peripheral device to the connector pin
specified by
n
, as follows:
n
Connector pin
0, 48 Drawer kick-out connector pin 3
[Notes]
ù
Peripheral device status data which can be transmitted are shown in the table below.
ù
Bit 0 is always set to “1” if no connection is made to the connector.
ù
When DTR/DSR control is selected, the printer transmits only 1 byte after confirming
that the host is ready to receive data (DSR signal is SPACE). If the host computer is
not ready to receive data (DSR signal is MARK), the printer waits until the host is ready.
When XON/XOFF control is selected, the printer transmits only 1 byte without
confirming the status of the DSR signal.
ù
Since this command is stored in the receive buffer and then executed during normal
command process, there may be a time lag between command reception and status
transmission, depending on the receive buffer status.
ù
When Automatic Status Back (ASB) is enabled using
GS a
, the status transmitted by
this command must be differentiated from the ASB status. For a detailed description,
refer to Appendix D.
ù
If
n
is out of the specified range, this command is ignored.

Epson TM-U295 Specifications

General

Color	No
Maximum number of copies	2 copies
Maximum printing width (columns)	42
Dimensions (WxDxH)	180 x 190.5 x 101.5 mm
Power requirements	24 VDC±10%
Connectivity technology	Wired
Printing media thickness	0.09/0.35 µm
Mean time between failures (MTBF)	180000 h
Safety	UL, CSA C22.2 No. 950
Country of origin	Japan
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking
Pallet width	1200 mm
Pallet height	1000 mm
Pallet length (UK)	1370 mm
Quantity per pallet	120 pc(s)
Quantity per pallet (UK)	160 pc(s)
Master (outer) case width	300 mm
Quantity per pallet layer	24 pc(s)
Master (outer) case height	405 mm
Master (outer) case length	485 mm
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	32 pc(s)
Quantity per master (outer) case	4 pc(s)
Package depth	270 mm
Package width	235 mm
Package height	185 mm
Package weight	1845 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	191 mm
Width	180 mm
Height	102 mm
Weight	1600 g