EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
25 24
3.5 Self-test
1) The printer has a self-test that checks the following:
ù
Control circuit functions
ù
Printer mechanisms
ù
Print quality
ù
Control ROM version
ù
RAM
ù
DIP switch settings
2) Starting the self-test
To start the self-test on slip paper, hold down the RELEASE button while you turn on the printer. Then
release the RELEASE button. The printer is now in the slip paper standby state. Insert a sheet of slip
paper. The printer prints the current settings and ejects the slip paper.
3) Self-test printing
Press the RELEASE button. Insert another sheet of slip paper and the printer will print characters from
its character sets. During the self test, the printer will stop whenever it is out of paper. When this
happens, press the RELEASE button and insert another sheet of slip paper.
4) Ending the self-test
Continue this process until the printer indicates the end of the self test by printing "
***
completed
***
",
ejects the slip paper, and goes into the normal mode.