QX50/QX200/QX2000; (SW Version 6.0.x) 24
QX50/QX200/QX2000 Manual I: Installation Guide
You may enter your local specific emergency codes into the appropriate field. For example, in
the United States the emergency number is 911, whereas in Germany it is 112, 110. In case of
an emergency you can then pick up any FXS phone and dial your configured emergency code
without any prefixes for PSTN calls.
The PSTN Access Code is the prefix number you choose to dial to tell the QX IP PBX to “make
this call over PSTN”. Users in the United States will usually choose 9 here. European users
usually would want to enter zero (0). If you do not enter anything into this field, the PSTN
Access Code configuration should be done manually from the Call Routing table.
Click on Next to display the Summary Page.
Finishing the System Configuration Wizard
Fig.I- 15: System Configuration Wizard finishing page
Click on Finish to complete the System Configuration Wizard. The QX IP PBX will then stop in-
ternal functions and apply the changes made in the Wizard.
Fig.I- 16: System Configuration Wizard Execution Progress page
To Next Page
Loading...
General
