QX50/QX200/QX2000; (SW Version 6.0.x) 37
QX50/QX200/QX2000 Manual I: Installation Guide
Step 2-B: Using Receptionist
If you wish to use the Receptionist’s features, the Receptionist should be set up on the QX IP
PBX. The QX IP PBX’s basic configuration should be done in the same way as described in the
Step 2.
The Receptionist related setup, with detailed instructions on how to configure the QX IP PBX
and the attached IP Phones, is described in the “Receptionist Setup on Epygi IP PBX” docu-
ment, which you can find at the Epygi’s Web portal.
To Next Page
Loading...
General
