CHAPTER E 97
Troubleshooting
Q. Do I have to use the same passphrase every time I generate the
baseline?
A. No, you have to verify the baseline using the same passphrase that
was used when the baseline was generated, but you do not have to
use the same passphrase again when you generate the baseline
again.
E.4 Firewall
Q. After installing the product, users cannot access samba shares
on my computer, how can I fix this?
A. The Office firewall profile contains a rule that allows Windows
Networking but that rule is disabled by default. Enable the rule to
allow accesses to samba shares.
Q. After intalling the product, I cannot browse local are network
domains and workgroups (SMB). How can I fix this?
A. You need to add a rule to the firewall that allows browsing Windows
shares on your local area network. Follow these instructions:
a. Go to Firewall > Network Services page in the Web User
Interface advanced mode.
b. Click Add new service.
c. Create the following service:
Service Name: Windows Networking Local Browsing
Protocol: UDP
Initiator ports: 137-138
Responder: >1023
Description SMB LAN browsing
d. Click Add as a new service and Save.
e. Go to the firewall menu and click Firewall Rules.
f. Click Add new rule.
g. Create the following rule:
To Next Page
Loading...
Need help?
General
