Tab page Slaves shows the connected I2C modules and IO-Net modules and additional diagnostic data. It is
intended to be used as a service tool to find communication errors.
SYSTEM COMMUNICATION tab page Slaves
Setting used to reset all data to zero simultaneously.
Use the Input (I) and Output (O) test menu to set the control computer to test the communication channels.
In the IO-test menu inputs can be readout and outputs controlled at system level.
The functions in the IO-test menu stop all the control actions of the control computer. Only use this to
quickly test IO functions.
This function may only be used by qualified personnel, as parts of the installation may be damaged with
direct control.
To Next Page
Loading...
General