This manual has been compiled with the utmost care. If, however, you should discover an error, please inform
Fancom B.V.
The documentation consists of the following manuals:
User's manual
The user's manual is intended for the end user. This manual supplies information about working with the
control computer after installation.
Installer's manual
The installer's manual is intended for installers. This manual supplies information about connecting and
configuring the control computer.
Operation and safety instructions
These subjects are covered in a separate manual. This manual also applies to other control computers in the
Fancom F2000-line. Always read the safety instructions and warnings carefully before using the control
computer.
Always keep this manual close to the Lumina 16.
The following symbols are used in this manual:
Note providing recommendations and additional information.
Warning indicating damage to the product if you do not follow procedures carefully.
Warning indicating danger to humans or animals.
Electrical shock hazard. Danger to humans and animals.
Example of a practical application of the described functionality.
Describes the key combinations for arriving at a particular screen.
Decimals
The control computer and this manual use a decimal point in values. For example: a weight is shown as 1.5 kg
(not as 1,5 kg).
For any questions and support, please contact the local Fancom Sales & Service Center.
To Next Page
Loading...
General