How to set up your FLIR FX
camera
5
5.1 FLIR FX Android™ setup
1. Download the FLIR FX app from the Google Play Store.
2. Connect the included USB cable to the power adapter. Connect the other end of the
USB cable to the camera or the camera stand and connect the power adapter to a
power outlet.
NOTE
• The REC LED located on the top of the camera will glow orange indicating the camera is charg-
ing. It will glow green when the camera is finished charging. The battery will take 6 hours to fully
charge.
• You can connect the power adapter and USB cable to the camera or camera stand. Do not con-
nect a USB cable to both the camera and stand at the same time.
3. The camera will turn on automatically when the power is connected and the REC
LED will turn on. If camera does not turn on, press the power button to turn on the
camera.
#LX400067; r.27354/27358; en-US
8
To Next Page
Loading...
Need help?
General
