GENERAL INFORMATION
WARNINGS
Use load securing straps to an
approved standard, e.g. DIN.
Make sure that you secure all loose
items properly.
Place luggage and other loads as low
and as far forward as possible within
the luggage or loadspace.
Do not drive with the liftgate or rear
door open. Exhaust fumes may enter
your vehicle.
Do not exceed the maximum front
and rear axle loads for your vehicle.
See Vehicle Identification Plate
(page 186).
Do not allow items to contact the
rear windows.
Note: When loading long objects in to your
vehicle, for example pipes, timber or
furniture be careful not to damage the
interior trim.
LUGGAGE ANCHOR POINTS
REAR UNDER FLOOR
STORAGE
Adjustable Load Floor
Vehicles with the standard size spare tire
can adjust the load floor to two positions.
The load floor can be placed on either the
high or the low position on shelves located
at the rear of the luggage compartment
trim.
121
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Load Carrying
To Next Page
Loading...
Need help?
General
