FASTENING THE SAFETY
BELTS
WARNINGS
Insert the tongue into the buckle until
you hear a distinct click. You have
not fastened the safety belt correctly
if you do not hear a click.
Make sure that your safety belt is
securely stored away and is not
outside your vehicle when closing the
door.
Pull the belt out steadily. It may lock if you
pull it sharply or if your vehicle is on a slope.
Press the red button on the buckle to
release the belt. Let it retract completely
and smoothly.
Note: When not in use, place the safety
belts in to the slots on the outboard trim.
21
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Safety Belts
To Next Page
Loading...
Need help?
General
