Small arrow-shaped marks on
the sills show the location of the
jacking points.
A
Assembling the Wheel Brace
WARNING
The screw-in towing eye has a
left-hand thread. Turn it
counterclockwise to install it. Make
sure that the towing eye is fully tightened.
Insert the screw-in towing eye into the
wheel brace.
Removing the Wheel Trim
1. Insert the wheel trim remover.
2. Remove the wheel trim.
181
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Wheels and Tires
To Next Page
Loading...
Need help?
General
