Registering/Deleting/Renaming Stored Programs
399
Stored Programming
8
3 Select [Delete].
Delete
Deletes the stored program.
Note • Deleted stored programs cannot be restored.
Cancel
Cancels deleting the stored program.
Entering/Changing a Stored Program Name
The following describes how to enter or change the name of a stored program.
Up to 36 characters are allowed for a stored program's name.
For information on how to enter characters, refer to "Entering Text" (P.99).
1 Select [Enter/Change Name].
2 Select the number to register or change a name.
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.97).
3 Enter a name, and select [Save].
Assigning/Changing Icons for Stored Programs
The following describes how to assign or change an icon of a stored program.
You can select from 12 icons.
1 Select [Assign/Change Icon].
2 Select the number to assign or change an icon.
To Next Page
Loading...
Need help?
General
