Fuji Xerox DocuPrint M215 b User Manual

Copying 212
 Output Paper Size
You can specify the output paper size.
1 For the DocuPrint M215 fw, load the document(s) face up with top edge in first into the ADF or
place a single document face down on the document glass, and close the document cover.
For the DocuPrint M215 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M215 fw Only)" on page 208
• "Making Copies From the Document Glass" on page 206
2 Press the Copy button.
3 Select Output Paper Size, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
• To change the default setting of Output Paper Size , change the setting of Paper Size under Tray
Settings
→ MPF .
A4 - 210x297
*
A5 - 148x210
B5 - 182x257
Letter - 8.5x11
7.2x10.5"
US Folio - 8.5x13
Legal - 8.5x14
Statement
#10Env - 4.1x9.5
Monarch Env.
Monarch Env. L
C5 Env - 162x229
DL Env - 110x220
DL Env L - 110x220
148 x 100mm
148 x 200mm
Env Yougata 2
Env Yougata 2L
Env Yougata 3
Env Yougata 3L
Env Yougata 4
Env Yougata 6
Env Younaga 3
Env Nagagata 3

Fuji Xerox DocuPrint M215 b Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M215 b
Category	All in One Printer
Language	English