Troubleshooting
412
Auger Mark
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
Problem Action
The printed result has auger
mark.
The toner cartridge may be low or need to be replaced. Confirm the
amount of toner in the toner cartridge.
1
Check the toner level in the
Consumables
tab in the
Printer
Status
window of the SimpleMonitor.
2
Replace the toner cartridge as necessary.
Start
Clean Developer
.
1
Launch the Printer Setting Utility, and click
Clean Developer
on
the
Diagnosis
tab.
2
Click the
Start
button.
To Next Page
Loading...
Need help?
General
