Fuji Xerox DocuPrint M215 b User Manual

Scanning 230
 Scanning From the Operator Panel
The following procedure uses Microsoft
®
Windows
®
7 as an example.
NOTE:
• Ensure that the printer is connected to the computer using the USB cable.
• You must use Express Scan Manager on your computer to configure the output destination of the scanned
image files.
1 For the DocuPrint M215 fw, load the document(s) face up with top edge in first into the ADF or
place a single document face down on the document glass, and close the document cover.
For the DocuPrint M215 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M215 fw Only)" on page 208
• "Making Copies From the Document Glass" on page 206
2 Press the Scan button.
3 Select Scan to Computer(USB), and then press the button.
4 Configure the scanning settings as necessary.
5 Press the (Start) button.
The scanned image file is generated.
NOTE:
• If the window to select the program appears on your computer, select Express Scan Manager-Btype ,
and then click
OK .
• File type of scanned data varies depending on application on computer.
See also:
• "Express Scan Manager" on page 66

Fuji Xerox DocuPrint M215 b Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M215 b
Category	All in One Printer
Language	English