233
Scanning
Scanning Using the WIA Driver
Your printer also supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is
one of the standard components provided by Windows XP and later operating systems and works with
digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan an image
and easily manipulate those images without using additional software.
The following procedure uses Windows 7 as an example.
NOTE:
• Ensure that the printer is connected to the computer using the USB cable.
1
For the DocuPrint M215 fw, load the document(s) face up with top edge in first into the ADF or
place a single document face down on the document glass, and close the document cover.
For the DocuPrint M215 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M215 fw Only)" on page 208
• "Making Copies From the Document Glass" on page 206
2
Start the drawing software, such as Paint for Windows.
NOTE:
• When you use Windows Vista, use Windows Photo Gallery instead of Paint.
3
Click the Paint button → From Scanner or Camera.
The WIA window appears.
4
Select your scanning preferences and click Adjust the quality of the scanned picture to
display the Advanced Properties dialog box.
5
Select the desired properties including brightness and contrast, and then click OK.
6
Click Scan to start scanning.
7
Click Save As from the File menu.
8
Enter a picture name, and select a file format and destination to save the picture.
To Next Page
Loading...
Need help?
General
