403
Troubleshooting
The Output Is Too Light
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
Problem Action
The output is too light. The toner cartridge may be low or need to be replaced. Confirm the
amount of toner in the toner cartridge.
1
Check the toner level in the
Consumables
tab in the
Printer
Status
window of the SimpleMonitor.
2
Replace the toner cartridge as necessary.
Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.
See also:
• "Usable Print Media" on page 154
Try changing the
Paper Type
setting in the print driver.
1
On the
Paper/Output
tab in
Printing Preferences
of the print
driver, change the
Paper Type
setting.
Disable
Toner Saving Mode
in the print driver.
1
On the
Graphics
tab in
Printing Preferences
of the print driver,
ensure that the
Toner Saving Mode
check box is not selected.
To Next Page
Loading...
Need help?
General
