399
Troubleshooting
Display Problems
Problem Action
After the printer is turned on, the
display on the LCD panel is
blank, keeps showing the Fuji
Xerox logo, or the back light is not
lit.
Turn off the printer, wait for 10 seconds, and turn on the printer. Self
Test Message appears on the LCD panel. When the test is
completed, the
Select Function
screen is displayed.
Menu settings changed from the
operator panel have no effect.
Settings in the print driver, or the printer utilities have precedence
over the settings made on the operator panel.
Change the menu settings from the print driver or the printer utilities
instead of the operator panel.
To Next Page
Loading...
Need help?
General
