Fuji Xerox DocuPrint M215 b User Manual

353 Using the Operator Panel Menus and Keypad
• Alert Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message
appears.
Values:
• mm / inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
Time Format 12H* Specifies the time format.
24H
Time Zone
Specifies the time zone.
Panel Select Tone Off* Does not emit a tone when the operator panel input is correct.
Min Emits a tone at the specified volume when the operator panel
input is correct.
Middle
Max
Panel Alert Tone Off*
Does not emit a tone when the operator panel input is
incorrect.
Min Emits a tone at the specified volume when the operator panel
input is incorrect.
Middle
Max
Auto Clear Alert Off*
Does not emit a tone before the printer performs auto clear.
Min Emits a tone at the specified volume five seconds before the
printer performs auto clear.
Middle
Max
Job Tone Off
Does not emit a tone when a job is complete.
Min Emits a tone at the specified volume when a job is complete.
Middle
Max
Alert Tone Off
Does not emit a tone when a problem occurs.
Min Emits a tone at the specified volume when a problem occurs.
Middle
Max
All Tones Off
Disables all the alert tones.
Min Sets the volume of all the alert tones at once.
Middle
Max
Millimeters (mm)*
Specifies the default measurement unit.
Inches (")

Fuji Xerox DocuPrint M215 b Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M215 b
Category	All in One Printer
Language	English