First-time se tup of yo ur d evice
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Import ant notes " , Page 11.
If your device is equipped with a W indows operating s ystem, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the AC voltage
using the AC adapter, see "
AC adapter connecting", Pag e 19. The AC adapter
must be connected during the entire installation process.
A system test is performed when your device is first switche d on. Various m essages
can appear. The display m ay remain dark for a short time o r may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the fir st-time setup process.
The battery must be charged if you want to operate your device u sing the battery.
When used on the move, the built-in battery provides the device with th e necessary po wer. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and c
hecking the device
Should y ou discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your d
evice for any visible damage which may have occurred during transportation.
You may nee
d the packaging in the future, if yo u need to transport your device.
Fujitsu 15