Using the ScanSnap in Various Ways (for Windows Users)
155
■ Removing Blank Pages from the Scanned Image Data
The ScanSnap is able to recognize and remove blank pages automatically from the scanned
image data. When you scan documents in Duplex mode, both sides of the documents are
scanned regardless if the back is printed or not. If a blank side is scanned, it is recognized as
"blank" and the image data is automatically removed.
To remove blank pages, change the settings by following the procedure below.
1. Select [Scan Button Settings] from the Right-Click Menu.
⇒ The ScanSnap setup dialog box appears.
2. Click the [Option] button on the [Scanning] tab.
⇒
The [Read mode option] dialog box appears.
• The following types of documents may be recognized as blank pages:
- Almost blank documents containing only a few characters
- Documents of only one color (including black) and without any patterns, lines, or charac-
ters
When you scan such documents, clear the [Allow automatic blank page removal] check box.
When discarding the scanned image data, check the image data for pages accidentally
removed.
• When the ScanSnap is used with CardMinder, blank pages are not removed.
To Next Page
Loading...
Need help?
General