Fujitsu S1500M - ScanSnap - Document Scanner User Manual

Cleaning Carrier Sheet
330
Cleaning Carrier Sheet
If the Carrier Sheet is used extensively, dirt and dust may stick onto the surface or the interior
and cause scanning errors.
Clean it regularly to avoid errors.
Cleaning method
Use dry, soft cloth, or soft cloth slightly moistened with Cleaner F1 or mild detergent to lightly
clean off the dirt and dust from the surface and the interior of the Carrier Sheet.
• Never use paint thinner or other organic solvents.
• Do not rub the Carrier Sheet too hard. Otherwise, it may be scratched or be deformed.
• After cleaning the interior of the Carrier Sheet with Cleaner F1 or mild detergent, dry the Car-
rier Sheet completely before closing it.
• As a guideline, it is recommended to replace the Carrier Sheet with new one every 500
scans. For details about purchasing Carrier Sheet, refer to "Purchasing the Carrier Sheet"
(page 347).

Fujitsu S1500M - ScanSnap - Document Scanner Specifications

General

Brand	Fujitsu
Model	S1500M - ScanSnap - Document Scanner
Category	Scanner
Language	English